Swap Seagate Barracuda 7200.12 PCB board 100535537 to recover your data from damaged HDD due to PCB failure. 100535537 is the board number on this PCB. If your HDD’s PCB has problems, the drive usually cannot boot up or there may be an inaccurate display in the BIOS of the hard drive’s information. Also power may not get to the hard drive and as a result it will not spin up.
There are two types of this Seagate 100535537 PCB:
1. Seagate 100535537 Barracuda 7200.12 PCB Circuit Board Details:
Board Number: 100535537
Main Controller IC: V60131
HDD Motor Combo IC: SH6968B
2. Seagate 100535537 B5502C20 Barracuda 7200.12 PCB Circuit Board Details:
Board Number: 100535537
Main Controller IC: B5502C20
HDD Motor Combo IC: SH6968B2
Note: Hard drive failures are NOT always caused by circuit board failure.
Possibilities of Seagate circuit board failures:
- Hard disk doesn’t spin up. Either no sound or a short, quiet tickling sound can be heard.
- Hard disk does not spin up. Buzzing sound can be heard.
- Hard drive spins up fine, but is not recognized in device manager or in BIOS. Hard drive recognized with default manufacturer value (like 0GB capacity, wrong SN or Model).
- There is a burning smell can be sensed coming from a hard drive or pcb circuit board.
- You can see a burned component on the circuit board.
- Hard drive makes a clicking sound.
- Extremely slow reading.
- Hard drive, after some time disappears from Device Manager and from the system. May also be running very hot.
Seagate 100535537 (V60131) Barracuda 7200.12 PCB Photo:
Seagate 100535537 (B5502C20) Barracuda 7200.12 PCB Photo:
Buy this Seagate PCB board online: PCB 100535537 (V60131)
Buy this Seagate PCB board online: PCB 100535537 (B5502C20)