Case:
You can recognize the hard disk in BIOS, but you can’t enter the system.Customers take measures to discover the problem and remove the hard disk from the notebook with software scanning and found a large amount of red XX.Then send it directly during the data recovery.
Solution:
After the data recovery engineer received the disk sent by the customer, he communicated with the customer. There are many bad channels through professional testing hard disks, which is basically the same as the customer describes.The engineer hung the hard disk on the UDMA to set some parameters to read the bad tract and start the image. The customer data was fully recovered through more than 2 hours.After the data security tips are lost, it is still possible to return to the problem that you should pay attention to the data after the data is lost: 1. Protect the scene, do not write new data on the fault hard disk or partition;The organization helps you restore the data unless you know how to restore the technology accordingly; 3. You can call for free consultation: 4006-759388, engineers will give you professional suggestions; 4. You can access data recovery technology website: http://www.sosit.com.cn, seeking technical support.