Case:
The motherboard of the customer table platform is broken. Originally, the 2 SATA hard disks were mounted that the RAID0 mode was set. RAID0 was the RAID array of the function group with the function group attached to it.After that, I re -purchased a model of the same model to mount these two hard disks. The data in the hard disk could not be recognized. I re -made RAID0 by myself. I still couldn’t see the original data. I only saw an unsigned large partition.
Solution:
According to the information provided by the customer, the engineer of the Data Recovery Center excludes the hard disk hardware problem through professional equipment PC3000 UDMA.Because the customer reposses the RAID0 of the two disks, it is initially concluded that some information on the head of the hard disk has been rewritten.The engineer of the Data Recovery Center, through Winhex, cloned a copy, use Winhex to analyze the underlying data of the copy, analyze the band size, disk order, etc. of the RAID, and reorganize the original array.Partition information restores all partition data, customer acceptance data is satisfied, and now the data is successfully recovered.