Case:
The client took a 2.5 -inch Hitachi notebook hard disk, saying that the hard disk could not be identified on the computer. The data was recovered and all the data in the hard disk were rescued.The data in the hard disk is important, will you leak data in the hard disk (the data recovery center has paid the deposit to the computer city and the after -sales service is guaranteed; there are 24 hours of monitoring, please rest assured, the data security is guaranteed!)When the engineer got the hard disk, it was found that the hard disk had been opened. The customer verified that the customer said that it had been sent to a certain data to restore the company to recover without recovery.
Solution:
The engineer of the data recovery center first detected the hard disk body and found that the hard disk had traces of the disk, and the circuit board was not burned and overcurrent.Perform the opening detection directly on the 100 -level dust cleaning platform. The hard disk disc has not seen scratches for the time being. The magnetic head is no longer the original magnetic head.Find the matching magnetic head in the accessories library, and cooperate with the international professional magnetic head replacement tool for magnetic head replacement.Through the professional equipment PC3000 UDMA, the hard disk was powered on, and the hard disk was found incomplete. Immediately made a squeak, accompanied by a burst of magnetic heads, the sound was terrible.Immediately disconnect, and then open the disk to detect the disc. The disc did not find traces of scratching. The diagnosis was severe damage to the hard disk firmware area or weakened the disc.The engineer of the data recovery center finds a model of the same hard disk, and uses professional equipment PC3000 UDMA to use the HOTSAWP (effective and secure data solution) virtual firmware area to use the PC3000 UDMA de mirror.More than 80 % of the data is restored, the customer accepts data satisfaction, and so far, the data is successfully recovered.