Case:
The server system is bad and there is no backup data before installing the system.Use the R710 server to set the disk installation option when installation. The server is initialized and all partitions are deleted.After the system installation is completed, it is found that there is only one partition that connects a plate to restore the data.
Solution:
The customer server data is sensitive, and the operation of mirror backup is prohibited to prevent external leakage data.A plate of engineers use a CD -ROM to start the server to detect the partition structure. It is found that there is only one system partition, and most of the space in the back is in a short spare state.The reason is the same as that of the single -machine hard disk deleting partition.After determining that there were no other faults, the engineer manually analyzed the original partition structure and was filled in the partition table.The original partition structure is restored. Except for the data of the original system area, other partition data is normal.With the assistance of an engineer, the server runs normally after reinstalling the system.