We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of2060-800055-001 PCB
- Western Digital – WD30EZRZ – Dead Drive – Voltage Spike
- WD40EZRZ-00GXCB0
Solutions of2060-800055-001 PCB (Donor PCB)
- WD 2060-800055-001 PCB
- WD40EFRX-68N32N0 WD PCB 2060-800055-001
- WD40EZRZ-00GXCB0 WD PCB 2060-800055-001
- WD40EZRZ-22GXCB0 DCM: HHNNNTJMHB WCC7K Western Digital 4TB
- Western Digital WD40EMRX-82UZ0N0 DCM: HANNNTJMHB 4TB
- WD30EZRZ-00GXCB0 DCM: HHRNHTJMHB WCC7K Western Digital 3TB
- WD30EZRZ-00GXCB0 DCM: HHNNNTJMHB WCC7K Western Digital 3TB
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.