Case:After the company was launched suddenly, a company could not find the hard disk. The customer service could find the hard disk after re -inserting the RAID card and hard disk. RAID information did not report an error. It was prompted that the system file was not found. Solution:After testing and analysis by the engineer…

Case:A factory array RAID5’s 3 300GB hard disks. Due to the sudden power off of the circuit failure server, the RAID information of the server was restarted to report an error. Solution:The engineer detects the hard disk hardware problem, then analyzes the array information and finds the correct array information. Finally, the virtual reorganization array…

Case:The BMW Chief Data Server has a problem with the database in the system and recovered with old backups with SQL, which has led to the lack of data in the current lack of data in recent months.The database 28 sets of accounts are all damaged.Data recovery and repair is required.Customers contact the data recovery…

Case:The server of a company fails to load the disk array information normally, causing the customer system to fully collapse.Due to the failure problem is the RAID disk array, so customers contact our center to help technical support. Solution:Our center sent a professional engineer to the customer company to assist. After asking the customer, the…

Case:In a certain enterprise, the server consists of eight hard disks RAID5. The single disk capacity is 146GB. Due to the failure of the array card, the data cannot be accessed by the SQL2005 database.Introduced by a familiar person, requiring the server RAID array card to burn the irreversible data recovery. Solution:Engineers use professional equipment…

Case:The RAID5 array of a certain electronics company crashes, the company’s system cannot run normally, and the data in the hard disk must be restored. Solution:Customers find our center to help data recovery.The server consists of 4 hard disks RAID5. Analyze the mirror image of 4 disks and find that the partition table and the…

Case:The customer’s server does not enter the system. There are a lot of important data in it. After careful testing, it was found that the RAID card was broken. Finally, the data recovery company was contacted by a friend’s referral to data recovery. Solution:After the customer came to our company, first made a sector backup…

Case:The Dell server storage of a company is a RAID5 array consisting of 12 SAS interfaces 300GB hard disk, which set up two RAID5 and 1 RAID0 respectively. Two membership disks have been alarm and the system cannot run normally.The server to save the company’s important report needs to be recovered, so the customer finds…

Case:The file server storage of the customer company suddenly has all hard disks bright yellow lights, and the server cannot access the RAID5 hard disk array. Solution:Customers directly move the file server to my data recovery center for data recovery. The server consists of 7 enterprise -level Seagate 500GB hard disks for RAID5 disk arrays.First…

Case:The customer is an IBM server with three hard disks, 250G*3windows Server 2003 system file sharing server.RAID card burn out. The data cannot be accessed. Solution:We conducted a physical mirror frame on the three hard disks and analyzed the main parameters of the original RAID5. After testing, it was found that the No. 2 hard…