Case:The notebook broke, and the hard disk was not identified in the mobile hard disk box. Solution:After the engineer’s test, the hard disk is encrypted by logical locks. It can only be identified normally in the original pen. Because the original notebook is damaged, it can only be unlocked. The hard disk specialties developed by…
Case:Unable to enter the system, and it is not recognized by moving hard disks. Solution:The detection is 0 magnetic tract damage, and there are a large amount of physical bad ducts in the front section of the sector. The mirror processing of the fault disk is used to use the special sector mirror software of…
Case:Display loss and unable to start, you can see 3 hard disk capacity. Solution:The detection is a physical bad sector No. 1 and No. 2. It is a array loss caused by obvious hard disk instability. The engineer has analyzed and virtual reorganization after the array information, and the data is 100%recovered.
Case:The system cannot be started, and the hard disk is changed after sales, but the data of the old hard disk needs to be recovered. Solution:The detection is a large amount of physical bad ducts, and the failure hard disk is made of full mirror processing, and data is restored.
Case:I accidentally fell when I used it, and I did not recognize it when I turned it on. Solution:In order to break the obvious magnetic head, replace the magnetic head in the dust -free room, brush the firmware and restore the data, and the data is successful.Data recovery suggestions, hard disks fail, do not blindly…
Case:The server was running normally the day before, but the company’s server did not run the next day, and it could not enter if it was opened. Solution:There is no hardware problem in the hard disk. The array loss caused by the suspected power off. The engineer analyzes the array parameters, and the virtual reorganization…
Case:The hard disk cannot be recognized, but there is no abnormal noise. Solution:It is a fault in the Seagate firmware door. The hard disk firmware is lost and the hard disk cannot be recognized. The special tools of our company are rewritten to the firmware. The hard disk is in good condition and the data…
Case:After the holiday, you cannot enter the system. Employees have misunderstandings (pull out the array hard disk 1 piece, try to find data and formatting the hard disk), and the database file needs to be restored. Solution:One hard disk is formatted, and two of the other three hard disks have 2 pieces of physical bad…
Case:On the first day after the holiday, I can’t turn on the machine, and I can hear the abnormal sound of the hard disk. Solution:Our company’s test is damaged by a magnetic head, and the magnetic head is replaced in the dust -free room, and the mirror and data are recovered. The data is 100%recovered.
Case:Starting the computer, the hard disk model is N40P, but the system cannot be available, and the hard disk cannot be recognized by the dial. Solution:The hard disk firmware is lost. There are a small amount of physical bad ducts in the firmware area and the data area. The efficiency source Mai Tuo specialized tools…
