Case:Customer Seagate 1TB mobile hard disk, because of accidental, the mobile hard disk fell from 0.2 meters high during use, resulting in inability to recognize. Solution:Customers get the data from our center, and the initial detection of the motor card is killed. There is a slight click. It is a significant failure caused by the…
Case:Seagate 1TB mobile hard disk USB3.0 interface requires data recovery. Customers accidentally fell to the ground because the mobile hard disk accidentally fell to the ground during use, and later could not be recognized. Solution:The engineer’s test found that the mobile hard disk motor did not turn, and a slight click. According to the customer’s…
Case:Customers have a Corclone 160G mobile hard disk. I do n’t know why they ca n’t use it suddenly. There are important information in it, and the hard disk data must be recovered. Solution:After further communication with the customer’s land, it is determined that the problem caused by this hard disk may be due to…
Case:The notebook used by customers cannot recognize the hard disk. Solution:The hard disk model is ST3750330AS, which may be a firmware problem, instruction, cutting level 1 to stop the motor, and after ready to take off the motor.Cut the 2 -level N1 initialization Smart table and GLIST table. After the power is disconnected, it is…
Case:Customer Seagate’s 1600G hard disk, the customer was accidentally operated when reinstalling the system, and chose to return from the mirror file to the entire hard disk. After the system was installed, only the C drive was left. Solution:The engineer first connected the faulty hard disk to the professional data recovery platform to access the…
Case:Mr. Guo’s 500G Seagate mobile hard disk, inserted into the computer, the hard disk could not be recognized. After the testing of the engineer, the mobile hard disk had a physical bad duct with important drawings in it and needed to recover. Solution:The engineer first evaluated the damage of the physical bad sectors of the…
Case:The original mobile hard disk of the Western Digital, 1TB, model is WD10EALS. The hard disk is forcibly power -off and the hard disk cannot be identified. Solution:Data recovery engineers tested the hard disk connected to the professional data recovery detection equipment, heard the hard disk knock -clicking, and stopped by knocking a few times.Engineers…
Case:The customer’s hard disk has been using it last night, but today I can’t enter the system today. Solution:Senior engineers must start the data by detecting that the hard disk magnetic head is broken, and the data must be opened to read the data.In the dust -free room, the engineer found a matching magnetic head…
Case:Customer WD Western Digital-Western Data My Passport series 1T mobile hard disk, USB cable is connected to the computer that the hard disk cannot be recognized, the hard disk is not abnormal, and the customer must restore documents, photos, recorded videos, and other important data. Solution:First use UDMA to detect the fault hard disk. The…
Case:Customers back up nearly 1 million log files to a 1TB of Western Drives. After more than an hour, they found that the hard disk card was dead.Every time you open it, you will be stuck.Because the hard disk still has important backup files before, these important backup files need to be restored. Solution:The hard…
