Case:The customer responds that the disk is not transferred after the hard disk is powered on, and all data in the hard disk must be restored. Solution:It is generally a problem with the circuit board without power. The use of a universal meter is really short -circuited by the spindle chip.I found a plate type…
Case:Customers took the old -fashioned hard disk recovery data of the Yituo IDE interface, and knocked on the disk after power generation. Solution:After testing, it was initially identified as a magnetic head. Because Ituo did not support the support tools, it can only be judged!After finding it for a long time, I found a similar…
Case:A disk of the customer company server has been damaged. After the dust is cleaned up, the hard disk is inserted again, causing the array information to be lost. Solution:Calculate the BLOC SIZE parameter, re -set up a virtual array, calculate all partition areas, all the data is restored, and the data recovers 100%.
Case:Customers’ desktop computer suddenly appeared to be unable to enter the system under normal use, and the Seagate 500GB desktop hard disk was found to be found to be identified by the computer. Solution:First detect whether it is a firmware problem, enter the instruction, cut off the electrometer at the level 1, and then lift…
Case:Customer laptop has been used normally before, and suddenly unable to turn on, so I took the laptop maintenance station for maintenance. The inspection found that it was a hard disk failure. The customer’s hard disk data was very important, and the data was urgently needed to restore the data. Solution:The customer’s notebook is Seagate…
Case:Customers have taken a hard disk of Seagate’s 160GB today, saying that the hard disk has no response to power. It has been the same for receiving other computers. Solution:First judge that there may be problems with the circuit board, or if the firmware is damaged.Then simplify the difficult method, first change the circuit board,…
Case:Customers took a hard disk recovery data of Seagate’s 500GB, saying that they could not enter the operating system, and they were crashing in PE. Solution:There is a problem with this self -inspection. After I barely detected it, I asked the customer which partition, 5 partitions in the hard disk.In the mirror image, 20%of the…
Case:The Customer’s Seagate hard disk cannot be recognized, but the sound of magnetic head reset is normal. Solution:First of all, 3K found that the magnetic head can be reset normally. Because there is a preparation on hand, the circuit board replacement work is performed (a large part of the 7th generation disk is caused by…
Case:The client said that the mobile hard disk was used yesterday, and some data were copied to the mobile hard disk.Today, I found that the mobile hard disk was received on the computer, and the computer was stuck, and the indicator of the mobile hard disk was always flashing.Hope to rescue all the data in…
Case:Customers do videos. The use of 1TB of Western Drives. Under normal shutdown, it is impossible to enter the operating system again. There are a lot of video files to be recovered. Solution:When the machine is connected, there is no partition. Open the disk management hard disk for initialization. At first glance, the partition table…
