We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of040111300 PCB
- HowTO How To replace Maxtor Calypso III board
- Maxtor DiamondMax Plus 9 80Gb ATA/133 HDD Fried
- MAXTOR DIAMONDMAX not running
- Maxtor
- Dead Maxtor Diamond Max+9
- Maxtor Diamond Max + 9 HDD 250GB sata version
- Maxtor Plus 9 120GB ATA/133: 6Y120P0032211 PCB is damaged!
- Best match for Maxtor 6y Hard drive PCB.. To Recover Data.
- Maxtor 6Y080P0 Problems
- WANTED TO SELL MAXTOR HARD DRIVE
Solutions of040111300 PCB (Donor PCB)
- 6B250R0 Maxtor PCB 040111300
- 6Y040P0 Maxtor PCB 040111300
- 6Y060L0 Maxtor PCB 040111300
- 6Y080L0 Maxtor PCB 040111300
- 6Y080M0 Maxtor PCB 040111300
- 6Y250M0, YAR51BW0, KMGD, ARDENT C8-C1 040111300, Maxtor SATA 3.5 PCB
- 6Y250M0, YAR51GW0, KGBD, ARDENT C8-C1 040111300, Maxtor SATA 3.5 PCB
- 6Y250M0, YAR51EW0, KGGD, ARDENT C8-C1 040111300, Maxtor SATA 3.5 PCB
- 6Y250M0, YAR51FW0, KMCD, ARDENT C8-C1 040111300, Maxtor SATA 3.5 PCB
- 7Y250M0, YAR51EW0, KMCD, ARDENT C8-C1 040111300, Maxtor SATA 3.5 PCB
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.