Case:
Mr. Li suddenly crashed when he used a computer. When the computer was turned on, the computer could not read the disk normally. Hearing the 1TB hard disk in the computer had abnormal noise, and found a data recovery center on the Internet.
Solution:
The engineer of the data recovery center tested the customer’s hard disk and found that the hard disk could not be recognized. Data recovery engineers are initially determined as magnetic head failure, and the magnetic head component needs to be replaced. After communicating with the customer well, the hard disk data recovery engineers query in the spare parts library to find a relatively matched hard disk, open the fault disk body in the data recovery 100 clean room, and operate the fault hard disk magnetic head component to replace the matching spare parts that match the matching parts Drive magnetic head component. After replacing the hard disk magnetic head component, the engineer took the hard disk to the professional data recovery device. After the engineer manually debugging, all parameters of the hard disk identification was normal. Finally, the engineer used the data to recover the device to make the hard disk comprehensive mirror cloning data. After more than ten hours, the data recovery was completed. Data recovery reminds you: Usually use the hard disk to make regular data backups, and sometimes the data is often lost suddenly without preparation. Do not try repeatedly when the hard disk is damaged, so as not to be scratched by hard disk pieces. The first time you find a professional formal data recovery company (www.fixhdd.cn) for data recovery, so as not to cause major losses for permanent loss of data. Data recovery, specializing in high -difficult hard disk, RAID server data recovery, data recovery professional brands.