Case:Under the normal use of the customer’s user computer, the system cannot enter the system the next day. The inspection found that it was a hard disk problem. The hard disk was the Seagate 1TB new disk, which was almost used for almost a year. Solution:The Seagate hard disk is new, and the production date…
Case:The storage device used by the customer’s desktop machine is assembled from a 7200.11 Seagate 1TB hard disk. Due to the sudden power off, the desktop storage device suddenly cannot work properly. A large amount of precious data is stored in the device.Customers find our center to help with data recovery through the Internet promotion….
Case:The client said that the new hard disk just replaced, all the data was directed to the new hard disk, and it was not recognized for a few days. Solution:Through the professional testing of the engineer, the cause of the fault is found. The hard disk firmware is damaged. This is currently a lot of…
Case:Customer Seagate 1TB mobile hard disk, because of accidental, the mobile hard disk fell from 0.2 meters high during use, resulting in inability to recognize. Solution:Customers get the data from our center, and the initial detection of the motor card is killed. There is a slight click. It is a significant failure caused by the…
Case:Seagate 1TB mobile hard disk USB3.0 interface requires data recovery. Customers accidentally fell to the ground because the mobile hard disk accidentally fell to the ground during use, and later could not be recognized. Solution:The engineer’s test found that the mobile hard disk motor did not turn, and a slight click. According to the customer’s…
Case:After the client’s Seagate hard disk collided fiercely, the computer could not be recognized, and the sound of “click”” was powered on. Because the data was important
Case:Customers have a Corclone 160G mobile hard disk. I do n’t know why they ca n’t use it suddenly. There are important information in it, and the hard disk data must be recovered. Solution:After further communication with the customer’s land, it is determined that the problem caused by this hard disk may be due to…
Case:The notebook used by customers cannot recognize the hard disk. Solution:The hard disk model is ST3750330AS, which may be a firmware problem, instruction, cutting level 1 to stop the motor, and after ready to take off the motor.Cut the 2 -level N1 initialization Smart table and GLIST table. After the power is disconnected, it is…
Case:Customer Seagate’s 1600G hard disk, the customer was accidentally operated when reinstalling the system, and chose to return from the mirror file to the entire hard disk. After the system was installed, only the C drive was left. Solution:The engineer first connected the faulty hard disk to the professional data recovery platform to access the…
Case:Mr. Guo’s 500G Seagate mobile hard disk, inserted into the computer, the hard disk could not be recognized. After the testing of the engineer, the mobile hard disk had a physical bad duct with important drawings in it and needed to recover. Solution:The engineer first evaluated the damage of the physical bad sectors of the…
