Case:The client said that the computer host was damaged, and then found a computer maintenance dealer to test. The diagnosis was a problem with the hard disk. The new hard disk was replaced, and some files were copied.BIOS cannot recognize the model of the hard disk.There are a total of 5 partitions in the hard…
Case:The customer describes the disk to the XP interface when the disk is made of the disk, and the after -plate prompts that the initialization is not identified to the partition. Solution:After receiving the disk to the recovery machine, I found that the machine was directly blue screen, and the NTFS.Sys was wrong. The system…
Case:The client said that the hard disk has been used normally, and then planned to clear the data, and used LFORMAT for low -style operations. I only knew that the low -style and specific situation could not be remembered. Solution:Low -style, LFORMAT low -grade programs will perform 0 operations at the default state when running….
Case:The general PC of the first department of a hospital cannot start the system the next day after the shutdown is used. The hospital maintenance personnel found that it is a hard disk failure, which is not identified as the hard disk. Because the internal storage of the hard disk has important data, the maintenance…
Case:A Seagate hard disk was connected together, and the circuit board interface was burned, so he replaced the entire interface, but still did not recognize the disk, so he turned to us. Solution:After replacing the interface, you can add electromagnetic heads normally. There is also a reset sound, but the hard disk cannot be recognized.Under…
Case:When the customer was used normally, it was unable to find the D E logic area and crashed when reinstalling the system. Solution:Receive 3K, power up, the magnetic head reset is normal, you can identify the hard disk normally. After entering DE, you cannot find the partition table.The results of the preliminary analysis should be…
Case:A customer’s hard disk of WD320GB cannot be recognized. Solution:First of all, the hard disk was tested, and the hard disk was found to have a knocking sound after power -on, so it was suspected that the magnetic head was damaged, because the customer only needed a folder data of the D drive, so it…
Case:The customer’s Western Digital 500GB mobile hard disk opens the prompt “Cannot recognize the file system RAW”” under the manager (a logic area NTFS). Solution:Such faults are often encountered
Case:After the financial computer of the customer company, after the hard disk had a problem, the company’s network management searched the online search solution and downloaded some partition software reconstruction partitions. The data still did not recover.So repeatedly reconstructed operations, and tried multiple software, and eventually no fruit, recovered in our center.After receiving my computer,…
Case:Customers use the sudden blue screen normally, so they reinstall the system by themselves, but the operation error and the deprivation system cannot be completed. Solution:The original failure may be a bad drive in the hard disk. On this basis, users have done another destructive operation “error zone””.This operation caused the problem to complexity.Detecting the…
