Case:The customer’s hard disk cannot be recognized, and the MHDD scanned by itself, and the hard disk is normal. Solution:From the perspective of the phenomenon, it should be a firmware problem. Using 3000 to normalize the disk format, find that the hard disk has n partitions. Seeing that the size and capacity are wrong, it…
Case:Customers use the deep reinstallation system by themselves. Solution:Diskgenius can only see one partition from the built -up table.Open Winhex, search for EB5890, find about 20 results, and remove them separately. The remaining 3 results are left. The previous DBR information fills the relevant parameters into the partition table and save it.The data is perfect.
Case:A client, Mr. Li’s 320GB laptop hard disk, originally had three partitions and suddenly could not open it. It also prompted that the partition needs to be formatted. After the formatting, the customer finds that all the data is lost. Solution:Because data is more important, customers find our center to help data recovery.After getting the…
Case:Customers’ computers cannot enter the system, and the system fails to install the system by themselves. Solution:For further testing of the hard disk, it is found that the hard disk has a large number of bad sectors. Users need to use the data of the other two partitions outside the system disk to use MHDD…
Case:After the customer shuts down at the authentic shutdown, it is found that the hard disk cannot be recognized. Solution:From the customer’s description and the date of the factory, it can probably be judged that the fault phenomenon should be the problem with ST’s firmware. It is normal to find that the magnetic head reset…
Case:After the customer is turned on normally, the hard disk does not recognize the hard disk. Solution:The old Samsung SP0802N all has a common problem, that is, there will be a slight knocking sound at this time after the power is working, and then the motor is stopped. In our case, this kind of problem…
Case:A client’s Samsung 80GB mobile hard disk cannot be used after collision during use. Solution:After opening the market, I found that the magnetic header was positioned. After the dust -free workbench made a magnetic correction, it was recognized. After the test, there were a lot of bad sectors. So a copy was made, and 70%of…
Case:After the customer’s Samsung notebook computer is turned off normally, it can be used to use the boot to enter the operating system again, and there is a problem with the hard disk. Solution:After 3K for testing, the hard disk can be identified and read the firmware, and there is no problem with the magnetic…
Case:After the customer responds to the capacity of the logic C and D drive, the customer response uses the depth one -click GHOST installation system. After the system is installed, only one partition is found. The user needs the data of the logic E and F drive. Solution:This is a typical partition table being destroyed….
Case:The customer’s hard disk accidentally fell, and then the computer could not be recognized. Solution:Use 3K test first, find that the indicator light is often lit, there is a knocking sound in the disk, the magnetic head does not reset and is accompanied by the fixedware and the magnetic head of the tap sound.The chance…
