SD card tip: please insert the disk into the drive for data recovery

Case:
Mr. Zhang is a fever -level photography enthusiast. He is a member of the local photography association. Some time ago, the association organized the style of collecting winds in other places and took more than a thousand RAW format photos.After returning, I found that the SD card was damaged and could not be read normally. After double -clicking the disk, it prompts: Please insert the disk into the driver, and after the card reader is connected to the computer, I can’t find the plate letter in my computer.

Solution:
Data recovery engineer testing, SD card hardware is damaged. This card can only read the code through FLASH read the device, and then manually combine data. Otherwise there is no other better recovery method. It took a day, the engineer read the Flash code. Because the RAW format photo is different from the JPG photo, the photos that began to restore cannot be edited. They can only be opened. document. After verification, the RAW files are all normal. It can be read and write, editable, pixels and resolution, and exposure time have not changed. The customer is very satisfied. Data recovery 24-hour hotline: 4006-759388 Reminder: If the file is lost by mistake, do not store any data in the hard disk, do not operate the hard disk, do not format the partition, otherwise the data that can be restored can be recovered. The second destruction cannot be recovered; if the hard disk is a hardware failure, the hard disk has been damaged or fell, do not power the hard disk, do not turn on the computer, do not connect to the computer, do not try to repair the disk, otherwise the deformation or damaged magnetic head will be very good It is possible to scratch the plate, which causes the data to be completely unable to recover.