We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of 100306336 PCB
- ST3160023AS Complete Drive or PCB required..
- IS it possible to spin up a seagate HDD without firmware ROM
- Need Seagate 7200.7 Board
Solutions of 100306336 PCB (Donor PCB)
- Seagate 100306336 PCB
- ST3120025AS Seagate PCB 100306336
- ST3120026AS Seagate PCB 100306336
- ST3160021AS Seagate PCB 100306336
- ST3160023AS Seagate PCB 100306336
- PCB ST3160023AS P/N: 9W2814-040 F/W: 3.05 100306336 REV A Seagate
- Seagate ST31600826AS 100306336 REV A 9W2734-176 PCB for Sale
- Seagate ST340041AS 100306336 REV A 9W2015-130 PCB for Sale
- Seagate ST340014AS 100306336 REV A 9W2015-130 PCB for Sale
- Seagate ST3160023AS 100306336 REV A 9W2814-033 PCB for Sale
- Seagate ST3120026AS 100306336 REV A 9W2813-301 PCB for Sale
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.