We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of100496208 PCB
- Seagate 320 GB PCB needed (3.5" 7200.11)
Solutions of100496208 PCB (Donor PCB)
- Seagate 100496208 PCB
- ST3320613AS Seagate PCB 100496208 REV A
- STM3320614AS Seagate PCB 100496208 REV A
- Seagate ST3320613AS P/N: 9FZ162-302 F/W: CC2H 320GB TK
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.