We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of100535537 PCB
- Seagate PCB 100535537 Rev. A Read Short Points
- Cannot access serial terminal of Seagate Hard Drive
- Seagate 7200.12 st31000528AS
- Segate 7200.12 suddently not recognised from bios
- Is This The Read Channel?
- overvoltage,external ST31000528A, diode checked
- Recover Data from failed Seagate 1TB without PCB
- FS: ST31000528AS – Non-Working
- seagate st31000528as
- Replaced PCB on burnt out Seagate motor still not turning
Solutions of100535537 PCB (Donor PCB)
- Seagate 100535537 PCB
- Seagate 100535537 PCB
- Seagate 100535537 PCB
- ST31000322CS Seagate PCB 100535537 REV A
- ST31000424CS Seagate PCB 100535537 REV A
- ST32000542AS P/N: 9TN158-568 F/W: CC94 2TB WU 5XW Seagate Barracuda LP
- PCB ST31000528AS Seagate P/N: 9SL154-336 F/W: CC38 100535537 REV A
- PCB ST32000542AS P/N: 9TN158-510 F/W: CC34 100535537 REV A ?Seagate
- PCB ST31000528AS 100535537 REV A ?P/N: 9SL154-044 F/W: AP25 Seagate
- PCB ST31000528AS Seagate P/N: 9SL154-240 F/W: AP63 100535537 REV C
- Seagate ST31000528AS 100535537 REV A 9SL154-515 PCB for Sale
- Seagate ST31000528AS 100535537 REV A 9SL154-301 PCB for Sale
- Seagate ST31000528AS 100535537 REV C 9SL154-241 PCB for Sale
- Seagate ST31000528AS 100535537 REV A 9SL154-044 PCB for Sale
- Seagate ST31000528AS 100535537 REV C 9SL154-578 PCB for Sale
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.