We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of100603204 PCB
- shorting points
- Seagate St1000dm003 Not Recognized Health
- Disque dur externe seagate barracuda HS
Solutions of100603204 PCB (Donor PCB)
- Seagate 100603204 PCB
- ST1000DL002 Seagate PCB 100603204 REV A
- ST1000DM000 Seagate PCB 100603204 REV A
- ST1000DM003 Seagate PCB 100603204 REV A
- ST1500DL001 Seagate PCB 100603204 REV A
- ST2000DL001 P/N: 9VT156-568 F/W: CC95 WU 5YD Seagate 2TB
- Seagate ST2000DL001 P/N: 9VT156-568 F/W: CC92 WU 2TB
- Seagate ST1500DL001 P/N: 9VT15L-568 F/W: CC95 1.5TB WU
- Seagate ST1500DL001 P/N: 9VT15L-569 F/W: CC96 1.5TB WU
- Seagate ST2000DL001 P/N: 9VT156-570 F/W: CC96 WU 5YD 2TB
- Seagate ST2000DL001 100603204 REV A 9VT156-568 PCB for Sale
- Seagate ST2000DL001 100603204 REV A 9VT156-569 PCB for Sale
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.