Case:
Shaoxing’s personal laptop is turned on to use the computer to find that the hard disk cannot be turned on normally, and the hard disk stays on the boot screen. It cannot enter the system normally.The customer immediately contacted a local computer maintenance company in Shaoxing for repair.Engineers’ tests found that hard disks were typical Seagate firmware incidents.You need to repair the firmware to recover.
Solution:
Data recovery engineers have been tested and firmware.Fix the firmware by repairing instructions.Detect the structural integrity of the firmware again.Successfully repair the firmware, and the hard disk can be used normally.Restore 24-hour hotline: 4006-759388 Reminder: If the file is lost by mistake, do not store any data in the hard disk, do not do any operation of the hard disk, do not format the partitionIt cannot be restored during the secondary damage; if the hard disk is a hardware failure, the hard disk has been damaged or fell, do not power the hard disk, do not turn on the computer, do not connect to the computer, do not try to repair the disk, otherwise the deformation or damaged magnetic head will be very goodIt may scratch the plate, which makes the data completely unable to recover.