Case:
The customer said that he was using a desktop computer for no reason. After pressing the RESET restart key, he could not enter the Windows operating system, thinking that the system was damaged.After that, I bought a Windows7 Ghost CD, and the system was not successfully installed several times.I hope to save the data in the hard disk, mainly the precious photos of children.
Solution:
The engineer of the Data Recovery Center first excluded whether the hard disk body had traces of opening, falling over, and whether the circuit board had burned and overcurrent failure. Through the professional equipment PC3000 UDMA, the hard disk was powered on.Search, but the search is incomplete, and the diagnosis is caused by the damage of the firmware of the hard disk.The engineer of the Data Recovery Center uses a professional device PC3000 UDMA to read the microcoding of the circuit board, and then finds the same micro -code from the PC3000 UDMA database. Load it to the RAM of the circuit board.In the firmware, detecting all modules found that the module was damaged and caused the hard disk to not recognize the disk. Use the PC3000 UDMA to repair the damaged startup module, and then use the PC3000 UDMA de mirror, with a small amount of bad ducts, the data recovers about 99%, the customer accepts data satisfaction.Payment, so far the data is successfully recovered.