HDD Printed circuit board (PCB) with board number 2060-701335-005 is usually used on these Western Digital hard disk drives: WD2500JS-75NCB3, DCM DSCHCTJAH, Western Digital 250GB SATA 3.5 Hard Drive; WD2500JS-98MHB0, DCM HSBHNT2CAN, Western Digital 250GB SATA 3.5 Hard Drive; WD2000JS-22MHB0, DCM DBBANT2AAN, Western Digital 200GB SATA 3.5 Hard Drive; WD2500BS-55RPB1, DCM DBBHCT2AHN, Western Digital 250GB…
Swap WD 2060-701335-005 PCB(Printed Circuit Boards) to recover your data from damaged HDD due to PCB failure. 2060-701335-005 is the board number on this PCB. If your HDD’s PCB has problems, the drive usually cannot boot up or there may be an inaccurate display in the BIOS of the hard drive’s information. Also power may not get to the hard drive and as a result it will not spin up.
WD 2060-701335-005 PCB Board Details:
Board Number: 2060-701335-005
Main Controller IC: 88i6545-TFJ1
HDD Motor Combo IC: L6283 1.3
Series: Western Digital PCB
Note: Hard drive failures are NOT always caused by circuit board failure.
Swap WD 2060-701335-005 PCB Circuit Board will not solve the problem below:
1. The hard drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer;
2. The hard drive will power up normally and be recognized correctly but will report a size of 0 bytes;
3. The hard drive will power up but report SMART errors on boot;
WD 2060-701335-005 PCB Photos:
Order Online: WD 2060-701335-005 PCB
