HDD Printed circuit board (PCB) with board number 2060-701590-000 is usually used on these Western Digital hard disk drives: WD5000AAKS-65A7B2, DCM HHRNNT2CH, Western Digital 500GB SATA 3.5 Hard Drive; WD6400AAKS-00A7B2, DCM HHRNNT2MA, Western Digital 640GB SATA 3.5 Hard Drive; WD1600AAJS-75M0A0, DCM DGNNHT2CH, Western Digital 160GB SATA 3.5 Hard Drive; WD1600AAJS-75M0A0, DCM HGRNHT2AHN, Western Digital 160GB…
Swap 2060-701590-000 WD PCB(Printed Circuit Boards) to recover your data from damaged HDD due to PCB failure. 2060-701590-000 is the board number on this PCB. If your HDD’s PCB has problems, the drive usually cannot boot up or there may be an inaccurate display in the BIOS of the hard drive’s information. Also power may not get to the hard drive and as a result it will not spin up.
Board Number: 2060-701590-000
Main Controller IC: 88i8846-TFJ2
HDD Motor Combo IC: L7251 3.1
Manufacturer: Western Digital
Note: Hard drive failures are NOT always caused by circuit board failure.
Swap 2060-701590-000 WD PCB will not solve the problem below:
1. The hard drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer;
2. The hard drive will power up normally and be recognized correctly but will report a size of 0 bytes;
3. The hard drive will power up but report SMART errors on boot;
WD 2060-701590-000 PCB Photos:
Order Online: Western Digital 2060-701590-000 PCB
