HDD Printed circuit board (PCB) with board number 2060-701675-001 is usually used on these Western Digital hard disk drives: WD2500BMVV-11DCLS0, DCM HHBVJHN, Western Digital 250GB USB 2.5 Hard Drive; WD10TMVV-11A27S2, DCM EHBVJHBB, Western Digital 1TB USB 2.5 Hard Drive; WD6400BMVV-11A1CS0, DCM HHCVJHBB, Western Digital 640GB USB 2.5 Hard Drive; WD5000BMVV-11A1CS0, DCM HBCTJABB, Western Digital 500GB…
Swap Western Digital Circuit Board 2060-701675-001 REV P1 to recover data from damaged hard drives due to PCB failure. 2060-701675-001 REV P1 is the board number on this PCB. If your HDD’s PCB has problems, the drive usually cannot boot up or there may be an inaccurate display in the BIOS of the hard drive’s information. Also power may not get to the hard drive and as a result it will not spin up.
Western Digital PCB 2060-701675-001 REV P1:
Board No.: 2060-701675-001 REV P1
Main Controller IC: 88i9045-TFJ2
Western digital pcb board 2060-701675-001 has 2 different types:
One has 2 BIOS, as the below photo:
When you swap this western digital PCB, you should move both the BIOS(U12&U14 chips) from your original wd PCB’s BIOS to the replacement board.
Other one just has 1 BIOS, as the below photo:
Western digital pcb 2060-701675-004 REV P1 also has the 2 different types as WD 2060-701675-001 REV P1 2.5″ one.
More Western Digital 2.5″ Laptop PCB please visit HDDzone.com.
