2024-11-23

hrt

Harddisk Diagnostic & Harddrive repair tool: HRT 3.0

DATARECOVERYUNION.COM04 mins

What is HRT 3.0?

HDD Repair Tool (HRT) HDD Repair Tool (short for “HRT”) is designed for HDD repair and data recovery by BVG Group.

Harddisk Supported:

  • IBM families DPTA, DJNA, DTLA5, DTLA7, AVER and AVVA.
  • IBM/HITACHI families AVV2, HDS7-VLAT (AVV3).
  • FUJITSU families MPG AT and MPG AH.
  • FUJITSU 2,5′ families MHK2xxxAT, MHL2xxxAT, MHM2xxxAT, MHN2xxxAT, MHR2xxxAT, MHS2xxxAT.
  • WESTERN DIGITAL families AA, BA, AB, BB, EB, DA, JB, и PB, on Marvell processor.
  • SAMSUNG families Voyager10, Voyager11, Voyager11+ и Victor40.
  • SEAGATE families U4, U5, U6, U7, U8, V8, U10, UX, Barracuda 2,3,4,5,7,8,9.
  • MAXTOR families Fireball3 (Ares), 541DX (Athena), 540X-4K (Romulus), DiamondMax Plus8 (N40P), DiamondMax Plus9 (Calypso), DiamondMax Plus16 (Falcon).
  • QUANTUM families LA, LB, LC, LM, AS, LD.
  • HITACHI 2,5′ families DK23xx: AA, BA, CA, DA, EA, EB, FB.
  • TOSHIBA 2,5′ families MKxxxxGAP, MKxxxxGAS, MKxxxxGAX.

HRT Data Recovery Edition

HRT Data Recovery Edition tool has been designed for recovering data from damaged hard drives. Full functionality can be achieved by using special interface, but it is possible to use the application alone without full functionality.

Main features:

1. The utility enables data copying from bad HDD to both a destination disk and image file.
2. During coping section having bad sectors can be skipped.
3. The utility enables to copy only sectors chains concerning to files which you are interested in without accessing to other sections of bad HDD.
4. In case of unstable read HDD data copying by means of statistic method is possible.
5. Data copying is based on the map. In this map only sections having data which you are interested in are marked.
6. The utility enables to stop and to start data copying. It means you can start copying from the breakpoint.
7. By any attempt of data reading from bad HDD this data will be copied to the destination.
fterwards, this data will be taken from the destination only once.
8. It is possible to copy data on every head taken separately.
9. 32-bit mode is embedded in controller card. This mode speeds up copying twice as it was.
10. Bad HDD mounting is possible in the system.
11. The utility enables to take into account offset for data sectors because of translator destroying.
12. The utility supports file systems FAT16, FAT32, NTFS (DOS/Windows), EXT2FS, HFS, HFS+ (Apple MAC).
13. You can edit partition tables manually.
14. If case of damaged references it is possible to find directories.
15. The utility functions both in complex HRT and separately. In complex the utility has got more abilities.

Related Links:

  • The complex history of HRT
  • Basic data recovery operations of HRT
  • HDD Repair Tool 1.0 for IBM
  • HRT Data Recovery Edition User Manual
Read More

HDD Repair Tools: PC3000 VS HRT

DATARECOVERYUNION.COM07 mins

As we know, both PC3000 and HRT are professional hard drive repair tools. Before we decide to buy one of them, here are some useful views for us.

Hello Everyone, I am still new to the industry and have a question in regards to Software/Hardware complex products. I recently called Ace Labs and got a quote for the PC3000 pci. It was more then I expected! I know PC3000 is great to Re-flash Firmware, repair Firmware.I also know it can be used for ATA Master password recovery. But I was not able to find a manual, which references all of PC 3000’s functionality. I have also looked at HRT 3.0. I was able to download the English manual to look at the GUI and some of it’s functionality. I did not see anything mentioning that the HRT can repair Firmware corruption. Does it have this ability? I did notice that HRT 3.0 has the ability to read from each Head separately can PC3000 do this as well? I could not find a HRT 3.0 distributor outside of Russia, what would be the best place to purchase and how many $$$. What is the functional difference between PC3000 and HRT 3.0? What is the price difference? I have found HRT on EBay, is there a way to distinguish the real version from Chinese copy? What is your experience with either product?

Personally I wouldn’t recommend HRT to anyone (I believe it is crap and cannot be used in a DR business. You will have zero support, and you have to be rather a firmware engineer than a DR tech to operate it). As far as i know, there are indeed no distributors outside of Russia, and some people say they receive no reply when they even ask for a quote (not to mention the product support). Pc3000 isn’t perfect as well, but at least it is possible to use it.  Data extractor (an Acelab product) can read from each head separately (as far as I know).

thank you for your opinion. I guess then It’s PC3000 or the highway  Do you use PC3000? AceLabs stated that it is dificult to use PC3000 and they wanted to sell me additional training. Since I can’t seam to find a manual online, it’s hard for me to say if It is difficult to use or not, what is your opinion? I would say I have intermediate HD and DR knowledge as well as Expert IT knowledge and some knowledge in Programming. I belive I should be able to figure most of the stuff out myself, but again, I don’t know If PC3000 is all Windos GUI based program or if commandline and some sort of scripting is required.  Thanks again

PC3000 is a GUI program but coded pretty badly. It is very hard to use it. I’ve never used it (I am only using my own software ) but seen lots of people who are using it and struggling… In other words it does have a GUI but the problem is that AceLab did not understand clearly what the GUI should be used for  So yes, it is hard to use it. It does not matter what are your skills unless you have skills recovering the system area. Therefore some basic training would be useful…

The manuals that come with the PC3000 are actually quite good (translations aside) .. AceLAbs don’t presume to know everything about every hard drive ever manufactured and they’re not afraid to admit that. But this card works very well.The difficulty in using it is no different to using any other NEW APPLICATION for the first time. I’m still having trouble with MS Acess!The GUI is difficult the first few times but practice makes perfect – especially if you are working on similar HDD.

I use PC3000, and I use Data Extractor very very often. I have never used HRT but am considering the Data Recovery edition ( http://www.bvg-group.ru/eng/diagnostic/HRT_DRE.php). this does not seem to have any repair utilities just recovery and seems very similar to Data Extractor. It has a similar interface, and supports HFS and EXT filesystems has built in partition and translator editors, is able to mount a failing disk to use with standard software. I have got a quote for 3000 USD, but this seems a little expensive. Anybody have any experience with this at all?

If you have any other views, please feel free to share it with us.

Read More