Case:
Data recovery center U disk repair was successful, and the main control chip and Flash chip were successfully replaced, and the software information was successfully written to help customers repair the data and recover economic losses for customers.The Customer Service Department of the Data Recovery Center received a call from the customer for help, saying that a U disk of their financial department could not be recognized, and the USB interface was not powered on, and there was no response. The customer tried the U disk repair operation and announced the failure.A large amount of financial data, including Kingdee data account set.
Solution:
Customers came to the data recovery center anxiously. The engineer of the data recovery center took the U disk and started the first step of the failure detection stage. After more than 10 minutes of chip voltage detection and the main control board circuit detection, the fault was initially determined to be as a preliminary conclusionThe main control chip is damaged, and it is difficult to buy the same main control board for the overall transplantation of the chip, which is very difficult.The data recovery center has many years of practical experience for the repairs of the U disk to purchase the BGA welding platform, and the precise transplantation of the chip has many years of practical experience, especially for U disk repair, chip -level restoration, etc. with very rich experience.After more than an hour of tension recovery, the data recovery center successfully replaced the main control chip and Flash chip to redefine the software information. The U disk was successfully identified, the capacity was 8G, and the data recovery was successfully repaired.