WDCWD5000AADS00S9B0 firmware lost data recovery

Case:
The customer’s hard disk has just been used for less than 2 months. When the customer restarts the computer through remote copying data.The customer tried to turn on again many times, and found that when the hard disk could not go down at the Windows 7 interface, wait a while to automatically restart the system.Customers immediately search for local data recovery companies through the Internet.Customers are sent to a data recovery company for inspection.X data recovery engineers said that the hard disk magnetic head was broken.Need to be treated.Miss Xu was more depressed. Why did the hard disk suddenly break in the hard disk in less than 2 months? He immediately consulted with a company colleagues. The colleague said that it should not. If the magnetic head is broken, your computer is not that failure.Customers immediately communicate with X data recovery engineers and need to get back the hard disk to send someone to check and restore.

Solution:
When the customer retrieves the hard disk to the data recovery center again, the hard disk failure cannot be checked normally to the hard disk and model.The project was analyzed by the hard disk physical firmware, and the circuit board and firmware of the hard disk were maliciously damaged.Data recovery engineers use firmware analysis and processing.After 2 hours of treatment.The data appeared in front of the customer, the original hard disk was just a few bad channels of logic.As a result, X data recovery company needs to open data recovery.Data recovery engineers suggested that data recovery must be watched and supervised throughout the process.